TS3USB30

具有单使能端的高速 USB 2.0 480Mbps 1:2 多路复用器/多路解复用器开关

The is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth 955 MHz of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 480 Mbps.

.

VCC Operation at 3 V and 4.3 V

.

1.8-V Compatible Control-Pin Inputs

.

IOFF Supports Partial Power-Down-Mode

Operation

.

Ron = 10 Ω Maximum

.

ΔRon <0.35 Ω Typical

.

CioON = 7 pF Typical

.

Low Power Consumption 1 µA Maximum

.

ESD Performance Tested Per JESD 22

.

6000-V Human Body Model HBM

A114-B, Class II

.

1000-V Charged-Device Model C101

.

250-V Machine Model A115-A

.

–3-dB Bandwidth = 955 MHz Typical

.

Packaged in 10-pin UQFN 1.4 mm × 1.8 mm