TS3USB30
具有单使能端的高速 USB 2.0 480Mbps 1:2 多路复用器/多路解复用器开关
The is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth 955 MHz of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 480 Mbps.
- .
- VCC Operation at 3 V and 4.3 V
- .
- 1.8-V Compatible Control-Pin Inputs
- .
- IOFF Supports Partial Power-Down-Mode
Operation
- .
- Ron = 10 Ω Maximum
- .
- ΔRon <0.35 Ω Typical
- .
- CioON = 7 pF Typical
- .
- Low Power Consumption 1 µA Maximum
- .
- ESD Performance Tested Per JESD 22
- .
- 6000-V Human Body Model HBM
A114-B, Class II
- .
- 1000-V Charged-Device Model C101
- .
- 250-V Machine Model A115-A
- .
- 3-dB Bandwidth = 955 MHz Typical
- .
- Packaged in 10-pin UQFN 1.4 mm × 1.8 mm