MK26FN2M0VMD18

NXP  MK26FN2M0VMD18  微控制器, 32位, K2 USB系列, ARM 皮质-M4F, 180 MHz, 2 MB, 256 KB, 144 引脚, MAPBGA

The is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 180MHz. The device incorporates 2048kB internal flash, 256kB internal RAM, two 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, four I2C modules and one I2S module.

.

ARM Cortex-M4 based core with DSP instructions and single precision floating point unit

.

FlexBus external bus interface and SDRAM controller

.

Four analog comparators CMP containing a 6-bit DAC and programmable reference input

.

1.2V Voltage reference

.

USB High-/full-/low-speed On-the-Go with on-chip high speed transceiver

.

USB Full-/low-speed OTG with on-chip transceiver

.

Secure digital host controller SDHC

.

Multiple low-power modes to provide power optimization based on application requirements

.

Memory protection unit with multi-master protection

.

3 to 32MHz main crystal oscillator and 32kHz low power crystal oscillator

.

48MHz Internal reference

.

Hardware random-number generator

.

Supports DES, AES, SHA accelerator CAU

.

Multiple levels of embedded flash security

.

4 Periodic interrupt timers

.

16-bit Low-power timer

.

Two 16-bit Low-power timer PWM modules

.

Two 8-channel Motor control/general purpose/PWM timers

.

Two 2-channel Quad decoder/general purpose timers

.

Real-time clock