MK26FN2M0VMD18
数据手册.pdfNXP(恩智浦)
微处理器
NXP MK26FN2M0VMD18 微控制器, 32位, K2 USB系列, ARM 皮质-M4F, 180 MHz, 2 MB, 256 KB, 144 引脚, MAPBGA
The is a 32-bit Kinetis K2x Microcontroller with USB control, based on ARM Cortex-M4 RISC architecture core operates at a maximum frequency of 180MHz. The device incorporates 2048kB internal flash, 256kB internal RAM, two 16-bit SAR A/D converter, two 12-bit D/A converter and 100 general-purpose I/O pins. This device also features communication interfaces like six UART modules, three SPI modules, four I2C modules and one I2S module.
- .
- ARM Cortex-M4 based core with DSP instructions and single precision floating point unit
- .
- FlexBus external bus interface and SDRAM controller
- .
- Four analog comparators CMP containing a 6-bit DAC and programmable reference input
- .
- 1.2V Voltage reference
- .
- USB High-/full-/low-speed On-the-Go with on-chip high speed transceiver
- .
- USB Full-/low-speed OTG with on-chip transceiver
- .
- Secure digital host controller SDHC
- .
- Multiple low-power modes to provide power optimization based on application requirements
- .
- Memory protection unit with multi-master protection
- .
- 3 to 32MHz main crystal oscillator and 32kHz low power crystal oscillator
- .
- 48MHz Internal reference
- .
- Hardware random-number generator
- .
- Supports DES, AES, SHA accelerator CAU
- .
- Multiple levels of embedded flash security
- .
- 4 Periodic interrupt timers
- .
- 16-bit Low-power timer
- .
- Two 16-bit Low-power timer PWM modules
- .
- Two 8-channel Motor control/general purpose/PWM timers
- .
- Two 2-channel Quad decoder/general purpose timers
- .
- Real-time clock