74ACT11373DW
TEXAS INSTRUMENTS 74ACT11373DW 逻辑芯片, 八路D型锁存器, 24SOIC
The is an Octal Transparent D-type Latch with 3-state outputs. It is designed specifically for driving highly-capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight latches of the 74ACT11373 are transparent D-type latches. While the LE input is high, the Q outputs follow the data D inputs. When the enable is taken low, the Q outputs are latched at the levels that were set up at the D inputs. A buffered OE\ input can be used to place the eight outputs in either a normal logic state high or low logic levels or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impendence third state and increased drive provide the capability to drive the bus lines in a bus-organized system without need for interface or pull-up components.
- .
- 3-state Bus driving true outputs
- .
- Full parallel access for loading
- .
- Buffered input and OE pins
- .
- Inputs are TTL-voltage compatible
- .
- Flow-through architecture optimizes PCB layout
- .
- Center-pin VCC and GND configurations minimize high-speed switching noise
- .
- Green product and no Sb/Br