FLUKE-1760 TR US
FLUKE-1760 TR US - Fluke Power Quality Recorder W/Trans-Topas Configured Us/Can Range 2637641
** 1760TR Three-Phase Power Quality Recorder**
**Features:**
* Fully Class-A compliant: Conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
* GPS time synchronization: Correlate data with events or datasets from other instruments with precision
* Flexible and fully configurable thresholds and scale factors: Allows user to pinpoint specific issues by defining the detailed criteria for detection and recording of disturbances.
* Uninterrupted power supply 40 minutes: Never miss important events - even record the beginning and end of interruptions and outages to help determine the cause
* 10 MHz, 6000 Vpk waveform capture: Get a detailed picture of even the shortest event
* 2 GB data memory: Enables detailed, simultaneous recording of numerous power parameters for long periods of time
* Comprehensive software included: Provides trend diagrams for root cause analysis, statistical summaries, report writing and real-time data monitoring in the online mode
* Plug and play: Allows quick setup with automatic sensor detection; sensors are instrument powered, eliminating the need for batteries
* Rugged field design: Insulated housing and a solid state design with no rotating components enable reliable testing under nearly any conditions
* Power quality statistics according to EN50160
* Voltage event list dips, swells and interruptions
**Continuous recording of:**
* Voltage
* Current
* Power P, Q, S
* Power factor
* kWh
* Flicker
* Unbalance
* Frequency
* Voltage and current harmonics to the 50th / Interharmonics
* THD
* Mains signaling
* Triggered recordings
* Online mode Oscilloscope, transients and events
* Fast transient analysis up to 10 MHz
* 4, 600 V voltage probes
* 4 dual-range flexible current probes 1000 A / 200 A AC
* GPS time sync receiver
* 2 GB Flash Memory
The Fluke 1760 Three-Phase Power Quality Recorder is fully compliant to IEC 61000-4-30 Class-A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and low-voltage networks, this power quality monitor provides the flexibility to customize thresholds, algorithms, and measurement selections. The 1760 power recorder captures the most comprehensive details on user-selected parameters.
**Applications:**
Detailed disturbance analysis – Perform high-speed transient analysis and uncover root cause of equipment malfunction for later mitigation and predictive maintenance. The fast transient option, with its 6000 V measurement range, allows capture of very short impulses such as lightning strikes.
Class-A quality-of-service compliance – Validate incoming power quality at the service entrance. Thanks to Class A compliance, the Fluke 1760 allows undisputable verification.
Event correlation at multiple locations – Utilizing GPS time synchronization, users can quickly detect where a fault occurred first, either inside or outside the facility.
Galvanic separation and DC coupling – Allows complete measurements on dissimilar power systems. For example troubleshoot UPS systems by simultaneously recording the battery voltage and power output.
Power quality and power load studies – Assess baseline power quality to validate compatibility with critical systems before installation and verify electrical system capacity before adding loads.
