TLC2274-Q1
汽车类高级 LinCMOSTM 轨至轨运算放大器
The TLC2272-Q1 and devices are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x-Q1 family offers 2 MHz of bandwidth and 3 V/µs of slew rate for higher-speed applications. These devices offer comparable AC performance while having better noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLC227x‑Q1 has a noise voltage of 9 nV/√Hz, two times lower than competitive solutions.
The TLC227x-Q1, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters ADCs. For precision applications, the TLC227xA-Q1 family is available with a maximum input offset voltage of 950 µV. This family is fully characterized at 5 V and ±5 V.
They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432-Q1 and TLV2442-Q1 devices. All of the parameters of the TLC227x-Q1 family enables the device to be applicable in most automotive applications.
- .
- Qualified for Automotive Applications
- .
- Device Temperature Grade: –40°C to 125°C
Ambient Operating Temperature Range
- .
- Device HBM ESD Classification Level 2
- .
- Device CDM ESD Classification Level C6
- .
- Output Swing Includes Both Supply Rails
- .
- Low Noise: 9 nV/√Hz Typical at f = 1 kHz
- .
- Low Input Bias Current: 1 pA Typical
- .
- Fully Specified for Both Single-Supply and Split-
Supply Operation
- .
- Common-Mode Input Voltage Range Includes
Negative Rail
- .
- High-Gain Bandwidth: 2.2 MHz Typical
- .
- High Slew Rate: 3.6 V/µs Typical
- .
- Low Input Offset Voltage 950 µV Maximum
at TA = 25°C
- .
- Macromodel Included