DK-K7-CONN-G-J
开发套件, Kintex-7 FPGA, 连接评估, PCI-E, Vivado, 仅限日本
The from is a Kintex-7 FPGA connectivity kit Japan specific. The Kintex®-7 FPGA connectivity kit is a 20Gb/s platform for high bandwidth and high performance applications containing all the necessary hardware, tools and IP to power quickly through evaluation and development of connectivity systems. This includes a 20Gb/s targeted reference design featuring PCI Express®, DMA IP core from Northwest logic, 10GBase-R, AXI and Virtual FIFO memory controller interfacing to an external DDR3 memory. To control and monitor this design, the board includes a connectivity GUI built on Fedora Live OS which includes all the software drivers. Additionally, this board contains the relevant SFP+ FMC daughter card, cable and transceiver modules needed to utilize this design.
- .
- Quickly prototyping high performance serial transceiver applications using Kintex-7 FPGAs
- .
- Hardware, design tools, IP and pre-verified reference designs
- .
- Demonstrates an featuring 10GBase-R interfacing to external DDR3 memory
- .
- Advanced memory interface with 1GB DDR3 SODIM memory, 16MB 128Mb quad SPI flash
- .
- Enabling serial connectivity with PCIe Gen2x4, SFP+ and SMA Pairs, UART, IIC
- .
- Supports embedded processing with MicroBlaze, soft 32bit RISC, 8Kb IIC EEPROM, SD card slot
- .
- Develop networking applications with 10-100-1000Mbps Ethernet GMII, RGMII and SGMII
- .
- Implement video display applications with HDMI out, expand I/O with FPGA mezzanine card interface
- .
- HDMI video output, 2x16 LCD, 8x LEDs display, 128MB 1024Mb linear BPI flash for PCIe configuration
- .
- 326080 logic cells, 840 DSP slices, 16020 memory, 16 GTY transceivers and 500 I/0 pins