DK-K7-CONN-G-J

开发套件, Kintex-7 FPGA, 连接评估, PCI-E, Vivado, 仅限日本

The from is a Kintex-7 FPGA connectivity kit Japan specific. The Kintex®-7 FPGA connectivity kit is a 20Gb/s platform for high bandwidth and high performance applications containing all the necessary hardware, tools and IP to power quickly through evaluation and development of connectivity systems. This includes a 20Gb/s targeted reference design featuring PCI Express®, DMA IP core from Northwest logic, 10GBase-R, AXI and Virtual FIFO memory controller interfacing to an external DDR3 memory. To control and monitor this design, the board includes a connectivity GUI built on Fedora Live OS which includes all the software drivers. Additionally, this board contains the relevant SFP+ FMC daughter card, cable and transceiver modules needed to utilize this design.

.

Quickly prototyping high performance serial transceiver applications using Kintex-7 FPGAs

.

Hardware, design tools, IP and pre-verified reference designs

.

Demonstrates an featuring 10GBase-R interfacing to external DDR3 memory

.

Advanced memory interface with 1GB DDR3 SODIM memory, 16MB 128Mb quad SPI flash

.

Enabling serial connectivity with PCIe Gen2x4, SFP+ and SMA Pairs, UART, IIC

.

Supports embedded processing with MicroBlaze, soft 32bit RISC, 8Kb IIC EEPROM, SD card slot

.

Develop networking applications with 10-100-1000Mbps Ethernet GMII, RGMII and SGMII​

.

Implement video display applications with HDMI out, expand I/O with FPGA mezzanine card interface

.

HDMI video output, 2x16 LCD, 8x LEDs display, 128MB 1024Mb linear BPI flash for PCIe configuration

.

326080 logic cells, 840 DSP slices, 16020 memory, 16 GTY transceivers and 500 I/0 pins