TPS92511DDA
TEXAS INSTRUMENTS TPS92511DDA 发光二极管驱动器, 1输出, 降压, 恒流, 4.5V-65V输入, 500kHz开关, 65V/500mA输出, HSOP-8
The is a 30W Anode Capable Constant Current Buck LED Driver for driving a single LED string with current up to 0.5A and efficiency up to 95%. Only 5 external components are required for basic operation and single layer PCB layout is feasible because of the integration of an N-MOSFET, no external current sensing resistor, no external compensation and the proper terminal assignment. A high-value external resistor programs the LED current so that fine tuning of the LED current can be achieved. Another high-value external resistor programs a constant switching frequency from 50 to 500kHz. EMI design becomes easier as a result of constant switching frequency. By adding simple external circuits, the device can handle applications with even higher input voltages. It applies a floating buck topology with a low-side N-channel power MOSFET, which does not need boot-strapping capacitor.
- .
- Requires no external current sensing resistor
- .
- Requires no external loop compensation
- .
- Ease of use, needs minimum 5 components
- .
- 1000:1 Contrast ratio feasible
- .
- Single layer PCB feasible
- .
- Can work as high voltage buck regulator
- .
- Can work as linear current shunt regulator
- .
- Integrated low-side N-channel MOSFET
- .
- LED current programmable up to 0.5A
- .
- Typically ±3.6% LED current accuracy
- .
- Switching frequency programmable from 50 to 500kHz
- .
- Current limit protection
- .
- VCC under-voltage lock-out
- .
- Thermal shutdown protection
- .
- Support analogue dimming and thermal foldback
- .
- Green product and no Sb/Br
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.