SN74AHCT574DW

TEXAS INSTRUMENTS  SN74AHCT574DW  触发器, 三态非反相, 正沿, D, 7 ns, 180 MHz, 8 mA, SOIC, 20 引脚

74AHCT 系列，Texas Instruments

高级高速 CMOS，TTL 逻辑

工作电压：4.5 - 5.5

兼容性：输入 TTL、输出 TTL

ESD 保护超过 JESD 22

按 JESD 17 标准，闩锁效应性能超过 250 mA

### 74AHCT 系列

得捷:
IC FF D-TYPE SNGL 8BIT 20SOIC

立创商城:
SN74AHCT574DW

德州仪器TI:
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

欧时:
### 74AHCT 系列，Texas Instruments高级高速 CMOS，TTL 逻辑 工作电压：4.5 - 5.5 兼容性：输入 TTL、输出 TTL ESD 保护超过 JESD 22 按 JESD 17 标准，闩锁效应性能超过 250 mA ### 74AHCT 系列

e络盟:
TEXAS INSTRUMENTS  SN74AHCT574DW  触发器, 三态非反相, 正沿, D, 7 ns, 180 MHz, 8 mA, SOIC, 20 引脚

艾睿:
Thanks to Texas Instruments and their SN74AHCT574DW flip flop device, you can ensure that your state information is saved and available for later use. It has a single-ended output signal. With a 3-state output, this is power management at its best. This flip flop has a minimum operating temperature of -40 °C and a maximum of 125 °C. This device comes in tube packaging. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V. It has 8 channels per chip.

安富利:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube

Chip1Stop:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube

TME:
IC: digital; 3-state, D-latch transparent; Channels:8; 4.5÷5.5VDC

Verical:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC Tube

力源芯城:
八上升沿D触发器三态同相输出

DeviceMart:
IC FLIP FLOP OCTAL D 3ST 20-SOIC