TLE5012B E1000
INFINEON TLE5012B E1000 芯片, 角传感器, AEC-Q100, 5.5V, SOIC-8
The is a 360° Angle Sensor that detects the orientation of a magnetic field. This is achieved by measuring sine and cosine angle components with monolithic integrated Giant Magneto Resistance iGMR elements. These raw signals sine and cosine are digitally processed internally to calculate the angle orientation of the magnetic field magnet. The TLE5012B is a pre-calibrated sensor. The calibration parameters are stored in laser fuses. At start-up the values of the fuses are written into flip-flops, where these values can be changed by the application-specific parameters. Further precision of the angle measurement over a wide temperature range and a long lifetime can be improved by enabling an optional internal autocalibration algorithm. Data communications are accomplished with a bi-directional Synchronous Serial Communication SSC that is SPI-compatible. The sensor configuration is stored in registers, which are accessible by the SSC interface.
- .
- Integrated magnetic field sensing for angle measurement
- .
- 360° angle measurement with revolution counter and angle speed measurement
- .
- Two separate highly accurate single bit SD-ADC
- .
- 15-bit Representation of absolute angle value on the output resolution of 0.01°
- .
- 16-bit Representation of sine/cosine values on the interface
- .
- Maximum 1.0° Angle error over lifetime and temperature-range with activated auto-calibration
- .
- Bi-directional SSC Interface up to 8Mbps
- .
- Supports Safety Integrity Level SIL with diagnostic functions and status information
- .
- Interfaces - SSC, PWM, incremental interface IIF, hall switch mode HSM
- .
- Output pins can be configured programmed or pre-configured as push-pull or open-drain
- .
- 0.25µm CMOS technology
- .
- ESD >4kV HBM