锐单电子商城 , 一站式电子元器件采购平台!
  • 电话:400-990-0325

AD9772A

14位, 160 MSPS的TxDAC + 2倍插值滤波器 14-Bit, 160 MSPS TxDAC+ with 2x Interpolation Filter

Product Details

The is a single-supply, oversampling, 14-bit digital-to-analog converter DAC optimized for baseband or IF waveform reconstruction applications requiring exceptional dynamic range. Manufactured on an advanced CMOS process, it integrates a complete, low distortion 14-bit DAC with a 2× digital interpolation filter and clock multiplier. The on-chip PLL clock multiplier provides all the necessary clocks for the digital filter and the 14-bit DAC. A flexible differential clock input allows for a single-ended or differential clock driver for optimum jitter performance.

For baseband applications, the 2× digital interpolation filter provides a low-pass response, thus providing as much as a threefold reduction in the complexity of the analog reconstruction filter. It does so by multiplying the input data rate by a factor of 2 while suppressing the original upper in-band image by more than 73 dB. For direct IF applications, the 2× digital interpolation filter response can be reconfigured to select the upper in-band image that is, the high-pass response while suppressing the original baseband image. To increase the signal level of the higher IF images and their pass-band flatness in direct IF applications, the AD9772A also features a zero-stuffing option in which the data following the 2× interpolation filter is upsampled by a factor of 2 by inserting midscale data samples.

The AD9772A can reconstruct full-scale waveforms with band-widths of up to 67.5 MHz while operating at an input data rate of 160 MSPS. The 14-bit DAC provides differential current outputs to support differential or single-ended applications.

A segmented current source architecture is combined with a proprietary switching technique to reduce spurious components and enhance dynamic performance. Matching between the two current outputs ensures enhanced dynamic performance in a differential output configuration. The differential current outputs can be fed into a transformer or a differential op amp topology to obtain a single-ended output voltage using an appropriate resistive load.

The on-chip band gap reference and control amplifier are con-figured for maximum accuracy and flexibility. The AD9772A can be driven by the on-chip reference or by a variety of external reference voltages. The full-scale current of the AD9772A can be adjusted over a 2 mA to 20 mA range, thus providing additional gain-ranging capabilities.

The AD9772A is available in a 48-lead LQFP package and is specified for operation over the industrial temperature range of –40°C to +85°C.

**Applications**

.
Communication transmit channel

W-CDMA base stations, multicarrier base stations,

direct IF synthesis, wideband cable systems

.
Instrumentation

### Features and Benefits

.
Single 3.1 V to 3.5 V Supply
.
14-Bit DAC Resolution and Input Data Width
.
160 MSPS Input Data Rate
.
67.5 MHz Reconstruction Pass Band @ 160 MSPS
.
74 dBc SFDR @ 25 MHz
.
250 mW Power Dissipation; 13 mW with Power-Down Mode
.
48-Lead LQFP Package
.
See Data Sheet for Additional Information

AD9772A PDF数据文档
图片 型号 厂商 下载
AD9772A ADI 亚德诺
AD9708ARUZ ADI 亚德诺
AD976ARZRL ADI 亚德诺
AD9715BCPZ ADI 亚德诺
AD9762ARUZ ADI 亚德诺
AD976BNZ ADI 亚德诺
AD977ARZ ADI 亚德诺
AD9705BCPZ ADI 亚德诺
AD9709ASTZ ADI 亚德诺
AD9763ASTZ ADI 亚德诺
AD9773BSVZ ADI 亚德诺