ADN4661BRZ-REEL7
单, 3 V , CMOS , LVDS ,高速差分驱动器 Single, 3 V, CMOS, LVDS, High Speed Differential Driver
Product Details
The ADN4661 is a single, CMOS, low voltage differential signaling LVDS line driver offering data rates of over 600 Mbps 300 MHz and ultra-low power consumption. It features a flow-through pinout for easy PCB layout and separation of input and output signals.
The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1 mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355 mV across a termination resistor at the receiv-ing end, and this is converted back to a TTL/CMOS logic level by a line receiver.
The ADN4661 and a companion LVDS receiver offer a new solution to high speed point-to-point data transmission, and a low power alternative to emitter-coupled logic ECL or positive emitter-coupled logic PECL.
**Applications**
* Backplane data transmission
* Cable data transmission
* Clock distribution
### Features and Benefits
- .
- ±15 kV ESD protection on output pins
- .
- 600 Mbps 300 MHz switching rates
- .
- Flow-through pinout simplifies PCB layout
- .
- 300 ps typical differential skew
- .
- 700 ps maximum differential skew
- .
- 1.5 ns maximum propagation delay
|
- .
- 3.3 V power supply
- .
- ±355 mV differential signaling
- .
- Low power dissipation: 23 mW typical
- .
- Interoperable with existing 5 V LVDS receivers
- .
- Conforms to TIA/EIA-644 LVDS standards
- .
- Industrial operating temperature range −40°C to +85°C
---|---