SN74HCT244QPWREP
八路缓冲器和线路驱动器,具有三态输出 OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUTS
This octal buffer and line driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The SN74HCT244 device is organized as two 4-bit buffers/drivers, with separate output-enable OE\ inputs. When OE\ is low, the device passes noninverted data from the A inputs to the Y outputs. When OE\ is high, the outputs are in the high-impedance state.
立创商城:
SN74HCT244QPWREP
德州仪器TI:
Enhanced product 8-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs
得捷:
IC BUF NON-INVERT 5.5V 20TSSOP
贸泽:
缓冲器和线路驱动器 Mil Enhance Octal Buffers & Line Drvr
艾睿:
Leading the input to the transmission line this SN74HCT244QPWREP buffer and line driver by Texas Instruments will amplify digital and analog signals. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 125 °C. This product will be shipped in tape and reel packaging so that components can be mounted effectively. It has 8 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.
安富利:
Buffer/Line Driver 8-CH Non-Inverting 3-ST CMOS 20-Pin TSSOP T/R
Newark:
# TEXAS INSTRUMENTS SN74HCT244QPWREP Buffer / Line Driver, 74HCT244, 4.5 V to 5.5 V, TSSOP-20
Win Source:
IC BUF NON-INVERT 5.5V 20TSSOP / Buffer, Non-Inverting 2 Element 4 Bit per Element 3-State Output 20-TSSOP