LTC4368IMS-2#PBF

芯片, 欠压/过压与反向保护器, MSOP-10

The from is a 100V UV/OV and reverse protection controller with bidirectional circuit breaker in 10 pin MSOP package. It protects applications from power supply voltages that may be too high, too low or even negative and from overcurrent faults in both forward & reverse directions. The LTC4368 controls gate voltage of a pair of external N-channel MOSFETs to ensure that load is connected to input supply only when there are no voltage or current faults. Two comparator inputs allow configuration of overvoltage OV and undervoltage UV set points using an external resistive divider. A current sense resistor sets forward and reverse circuit breaker current thresholds. After forward current fault, it either latches off power or retry after a user adjustable delay. After reverse current fault, it waits for output to fall 100mV below input to reconnect power to load. UV/OV faults also trigger 32ms recovery delay before external MOSFETs are turned back o

.

Wide operating voltage range from 2.5V to 60V

.

Overvoltage protection to 100V, reverse supply protection to -40V

.

50mV forward sense threshold, -3mV reverse threshold

.

Adjustable ±1.5% undervoltage and overvoltage thresholds

.

Low operating current of 80µA, low shutdown current of 5µA

.

Controls back to back N-channel MOSFETs

.

32ms turn-on delay debounces live supply input connections and blocks 50Hz and 60Hz AC power

.

Hot swappable supply input & pin selectable overcurrent auto-retry timer or latch-off

.

Input supply current of 30µA ON, 5µA OFF & reverse input supply current of -1.5mA

.

Operating temperature range from -40°C to 85°C