JB15HAP-2C
触觉开关 SPST OFFON 270g OF FLAT CAP RED
Series JB illuminated low profile process sealed tactiles meet sealing standard IP67 of IEC60529 similar to NEMA 4 & 13 and are ready for wave or manual soldering. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended the results do not produce hazardous energy. Series JB tactiles have not been tested for UL recognition or CSA certification.
贸泽:
触觉开关 SPST OFFON 270g OF FLAT CAP RED
艾睿:
With just a change in pressure this low profile JB15HAP-2C tactile switch from NKK Switches can turn your circuit on or off. This device has a maximum current rating of 0.125 A @ 24VDC. It has a SPST configuration. This tactile switch has an operating temperature range of -25 °C to 70 °C. The JB15HAP-2C tactile switch has a PC pin termination style. This product is 12.3 mm long, 14.7 mm tall and 11.8 mm deep. This red square button actuator is 1 mm long. The maximum DC voltage rating is 24 VDC.
Allied Electronics:
Switch; Sealed; Tactile; SPST; OFF-ON; Non-Illum; Flat Red Cap; 0.125A; 24VDC; Str PC
Chip1Stop:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 1000000Cycles 2.65N Thru-Hole
Verical:
Switch Tactile OFF ON SPST Square Button PC Pins 0.125A 24VDC 1000000Cycles 2.65N Thru-Hole
Powell:
LOW PROFILE TACTILE/PC
