LM96000CIMT/NOPB

板上安装温度传感器 HW Monitor

The is a Hardware Monitor has a two wire digital interface compatible with SMBus 2.0. Using an 8-bit ΣΔ ADC, the LM96000 measures the temperature of two remote diode connected transistors as well as its own die, the VCCP, 2.5V, 3.3VSBY, 5.0V and 12V supplies internal scaling resistors. To set fan speed, the LM96000 has three PWM outputs that are each controlled by one of three temperature zones. High and low PWM frequency ranges are supported. The LM96000 includes a digital filter that can be invoked to smooth temperature readings for better control of fan speed. The LM96000 has four tachometer inputs to measure fan speed. Limit and status registers for all measured values are included.

.

2-wire SMBus 2.0 compliant serial digital interface

.

Monitors 2 remote thermal diodes

.

Programmable autonomous fan control based on temperature readings

.

Noise filtering of temperature reading for fan control

.

3 PWM fan speed control outputs

.

Monitors 5 VID control lines

.

XOR-tree test mode

.

Green product and no Sb/Br