AD9993BBCZRL
AFE General Purpose 4ADC 14Bit 1.8V/3.3V 196Pin CSP-BGA T/R
Product Details
The AD9993 is a mixed-signal front-end MxFE® device that integrates four 14-bit ADCs and two 14-bit DACs. Figure 1 shows the block diagram of the MxFE. The MxFE is programmable using registers accessed via a serial peripheral interface SPI. ADC and DAC datapaths include FIFO buffers to absorb phase differences between LVDS lane clocks and the data converter sampling clocks.
The MxFE DACs are part of the Analog Devices, Inc., high speed CMOS DAC core family. These DACs are designed to be used in wide bandwidth communication system transmitter Tx signal chains.
The MxFE ADCs are multistage pipelined CMOS ADC cores designed for use in communications receivers.
**APPLICATIONS**
- .
- Point to point microwave backhaul radio
- .
- Wireless repeaters
### Features and Benefits
- .
- Quad 14-bit 250 MSPS ADC:
SFDR = 83 dBc at 87 MHz input
- .
- Dual 14-bit 500 MSPS DAC:
SFDR = 75 dBc at 20 MHz output
- .
- On Chip PLL Clock Synthesizer
- .
- Low Power:
1536 mW, 1 GHz master clock, on-chip synthesizer
- .
- 500 MHz double data rate DDR
- .
- LVDS Interfaces for DACs and ADCs
- .
- Small 12 mm × 12 mm lead-free BGA package