SN74AHC374N

TEXAS INSTRUMENTS  SN74AHC374N  触发器, D, 6.9 ns, 120 MHz, 8 mA, DIP, 20 引脚

The SNx4AHC374 devices are octal edge-triggered D-type flip-flops that feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

得捷:
IC FF D-TYPE SNGL 8BIT 20DIP

立创商城:
SN74AHC374N

德州仪器TI:
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs

e络盟:
# TEXAS INSTRUMENTS  SN74AHC374N  触发器, D, 6.9 ns, 120 MHz, 8 mA, DIP, 20 引脚

艾睿:
Store state information for later use by using the Texas Instruments SN74AHC374N flip flop device. With a 3-state output, this is power management at its best. It has a single-ended output signal. This flip flop has an operating temperature range of -40 °C to 125 °C. This device comes in tube packaging. This non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 5.5 V. It has 8 channels per chip.

安富利:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube

Chip1Stop:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube

Verical:
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin PDIP Tube

力源芯城:
八上升沿D触发器三态同相输出