STA8089FG

GPS/Galileo/Glonass/Beidou/QZSS接收器,带嵌入式射频和闪存

belongs to Teseo III family products. The device is a single die standalone positioning receiver IC working on multiple constellations GPS/Galileo/GLONASS/BeiDou/QZSS.

The device is backward compatible with STA8088FG, this enables fast customer application migration.

The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output with no need of external memories.

STA8089FGBD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.

**Key Features**

.

STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems

.

ST-DRAW Dead Reckoning Automotive Way supported STA8089FGBD only

.

Pin to pin compatible with STA8088FG

.

Single die standalone receiver embedding RF Front-End and low noise amplifier

.

-162 dBm indoor sensitivity tracking mode

.

Fast TTFF < 1 s in Hot start and 30 s in Cold Start

.

High performance ARM946 MCU up to 196 MHz

.

256 Kbyte embedded SRAM

.

In-package SQI Flash Memory 16 Mbits

.

Real Time Clock RTC circuit

.

32-bit Watch-dog timer

.

3 UARTs

.

1 I2 C master interface

.

1 Synchronous Serial Port SSP, Motorola-SPI supported

.

USB2.0 full speed 12 MHz with integrated physical layer transceiver

.

2 Controller Area Network CAN

.

2 channels ADC 10 bits

.

Operating condition:

.

Main voltage regulator VINL : 1.8 V ± 5%

.

Backup voltage VINB : 1.6 V to 4.3 V

.

Digital voltage VDD : 1.0 V to 1.32 V

.

RF core voltage VCC : 1.2 V ± 10%

.

IO Ring Voltage VddIO : 1.8 V ± 5% or 3.3 V ± 10%

.

Package:

.

VFQFPN56 7 x 7 x 1.0 mm 0.4 mm pitch

.

Ambient temperature range: -40/+85°C