LT1510-5CGN#PBF

LINEAR TECHNOLOGY  LT1510-5CGN#PBF  芯片, 电池充电器, 1.5A, 500KHZ, 16SSOP

The is a constant-voltage/constant-current Battery Charger features smallest, sim-plest and most efficient solution to fast-charge modern rechargeable batteries including Li-ion, nickelmetal-hydride NiMH and nickel-cadmium NiCd that require constant-current and/or constant-voltage charging. The internal switch is capable of delivering 1.5A DC current 2A peak current. The 0.1R on board current sense resistor makes the charging current programming very simple. One resistor is required to set the full charging current 1.5A to within 5% accuracy. The LT1510 with 0.5% reference voltage accuracy meets the critical constant-voltage charging requirement for lithium cells. The LT1510 can charge batteries ranging from 2 to 20V. Ground sensing of current is not required and the battery"s negative terminal can be tied directly to ground. A saturating switch running at 500kHz gives high charging efficiency and small inductor size.

.

Precision 0.5% voltage reference for voltage mode charging or overvoltage protection

.

Current sensing can be at either terminal of the battery

.

Charging current soft start

.

Shutdown control

.

3% Typical charging current accuracy

.

3µA Low reverse battery drain current