LPC1347FBD64,551
ARM MCU微控制单元, LPC Family LPC1300 Series Microcontrollers, ARM 皮质-M3, 32位, 72 MHz, 64 KB, 10 KB
Overview
The LPC1347FBD64 is an ARM Cortex-M3 based microcontroller for embedded applications featuring a high level of integration and low power consumption. The ARM Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1347FBD64 operates at CPU frequencies of up to 72 MHz. The ARM Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The ARM Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.
MoreLess
## Features
* ARM Cortex-M3 r2p1 processor, running at frequencies of up to 72 MHz
* ARM Cortex-M3 built-in Nested Vectored Interrupt Controller NVIC.
* Non Maskable Interrupt NMI input selectable from several input sources
* System tick timer
* 64 kB on-chip flash program memory with a 256 byte page erase function
* In-System Programming ISP and In-Application Programming IAP
* 4 kB on-chip EEPROM data memory with on-chip API support
* 12 kB SRAM data memory
* 16 kB boot ROM with API support
* Standard JTAG test interface for BSDL
* Serial Wire Debug
* Support for ETM ARM Cortex-M3 debug time stamping
* 51 General Purpose I/O GPIO pins
* 8 GPIO pins can be selected as edge and level sensitive interrupt sources
* Two GPIO grouped interrupt modules
* High-current source output driver 20 mA on one pin P0_7
* High-current sink driver 20 mA on true open-drain pins P0_4 and P0_5
* Four general purpose counter/timers
* Programmable Windowed WatchDog Timer WWDT
* Repetitive Interrupt Timer RI Timer
* 12-bit ADC with eight input channels and sampling rates of up to 500 kSamples/s
* USB 2.0 full-speed device controller
* USART with fractional baud rate generation
* Two SSP controllers with FIFO and multi-protocol capabilities
* I2C-bus interface supporting the full I2C-bus specification and Fast-mode Plus
* Crystal Oscillator with an operating range of 1 MHz to 25 MHz
* 12 MHz high-frequency Internal RC oscillator IRC trimmed to 1 % accuracy
* Internal low-power, low-frequency WatchDog Oscillator WDO
* PLL allows CPU operation up to the maximum CPU rate
* A second, dedicated PLL is provided for USB
* Clock output function with divider
* Four reduced power modes
* Power profiles residing in boot ROM
* Processor wake-up
* Integrated PMU Power Management Unit
* Power-On Reset POR
* Brownout detect with four separate thresholds for interrupt and forced reset
* Unique device serial number for identification
* Single 3.3 V power supply 2.0 V to 3.6 V
## Target Applications
* Consumer peripherals
* Medical
* Industrial control
* Handheld scanners
* USB audio devices
## Features