LC87F2K08AU-DIP-E
IC MCU 8Bit 8KB FLASH 24DIP
LC87F2K08A is a 8-bit Microcontroller with 8K-byte Flash ROM/256-byte RAM in 24-pin package. It has a function suitable for IGBT control. Main features are PPGProgrammable Pulse Generator, eight analog comparators, two AMP circuits, 5 channels of 12-bit resolution ADC, internal reset circuit and etc. that are software friendly circuits and these peripheral circuit can contribute to less external components. Also, plenty of serial interface circuits synchronous serial x 1, I2C x 1, UART x 1 can communicate with other LSIs. For software development, there is our original software development environment and with On-Chip Debugging function, it is easy to debug with user’s actual application.
Features | | Benefits
---|---|---
| | | | |
- .
- IGBT control 10-bit PPG pulse minimum setting pitch ≒ 84 ns
| |
- .
- High Efficiency & Low cost of IH products
- .
- Over-current, over-voltage and surge detect circuits with Amplifier2 and Analog comparator8
| |
- .
- High Efficiency & Low cost of IH products
- .
- Flash ROM : 8192 x 8 bits
Capable of on-board programming with a power voltage range of 4.5 to 5.5 V
Block-erasable in 128 byte units
Writing in 2-byte units
| |
- .
- ROM : 256 x 9 bits
| |
- .
- Package : DIP24S300mil, Pb-Free type
| |
- .
- Minimum bus cycle time : 83.3 ns 12 MHz
| |
- .
- Minimum instruction cycle time : 250 ns 12 MHz
| |
- .
- 5-channel 12-bit resolution AD converter
| |
- .
- Internal Reset Function
| |
- .
- Performance : 83.3 ns 12.0 MHz, VDD = 4.5 to 5.5 V, Ta = -40 to +85°C
| |