100352QIX

Low Power 8Bit Buffer with Cut-Off Driver

General Description

The 100352 contains an 8-bit buffer, individual inputs Dn, outputs Qn, and a data output enable pin OEN. A Q output follows its D input when the OEN pin is LOW. A HIGH on OEN holds the outputs in a cut-off state. The cut-off state is designed to be more negative than a normal ECL LOW level. This allows the output emitter-followers to turn off when the termination supply is −2.0V, presenting a high impedance to the data bus. This high impedance reduces termination power and prevents loss of low state noise margin when several loads share the bus.

The 100352 outputs are designed to drive a doubly terminated 50Ω transmission line 25Ω load impedance. All inputs have 50 kΩ pull-down resistors.

Features

■ Cut-off drivers

■ Drives 25Ω load

■ Low power operation

■ 2000V ESD protection

■ Voltage compensated operating range = −4.2V to −5.7V

■ Available to industrial grade temperature range