OPA2677
SpeedPlusTM 双路、宽带、大输出电流运算放大器
The provides the high output current and low distortion required in emerging xDSL and Power Line Modem driver applications. Operating on a single +12V supply, the OPA2677 consumes a low 9mA/ch quiescent current to deliver a very high 500mA output current. This output current supports even the most demanding ADSL CPE requirements with > 380mA minimum output current +25°C minimum value with low harmonic distortion. Differential driver applications will deliver < 85dBc distortion at the peak upstream power levels of full rate ADSL. The high 200MHz bandwidth will also support the most demanding VDSL line driver requirements.
Specified on ±6V supplies to support +12V operation, the OPA2677 will also support a single +5V or dual ±5V supply. Video applications will benefit from its very high output current to drive up to 10 parallel video loads 15Ω with < 0.1%/0.1° dG/dP nonlinearity.
The OPA2677 is available in either an SO-8 or QFN-16 and an HSOP-8 PowerPAD™ package.
- .
- WIDEBAND +12V OPERA ON: 200MHz G = +4
- .
- UNITY-GAIN STABLE: 220MHz G = +1
- .
- HIGH OUTPUT CURRENT: 500mA
- .
- OUTPUT VOLTAGE SWING: ±5V
- .
- HIGH SLEW RATE: 1800V/µs
- .
- LOW SUPPLY CURRENT: 18mA
- .
- FLEXIBLE SUPPLY RANGE:
- .
- +5 to +12V Single Supply
- .
- ±2.5 to ±6V Dual Supplies
- .
- APPLCATIONS
- .
- xDSL LINE DRIVER
- .
- CABLE MODEM DRIVER
- .
- MATCHED I/Q CHANNEL AMPLIFIER
- .
- BROADBAND VIDEO LINE DRIVER
- .
- ARB LINE DRIVER
- .
- POWER LINE MODEM
- .
- HIGH CAP LOAD DRIVER
All trademarks are the property of their respective owners.