AD8112JSTZ
ANALOG DEVICES AD8112JSTZ 芯片, 交叉开关, 音频/视频, 16X8, LQFP-100
Product Details
The AD8112 is a low cost, fully buffered crosspoint switch matrix that operates on ±12 V for audio applications and ±5 V for video applications. It offers a −3 dB signal bandwidth greater than 60 MHz and channel switch times of less than 60 ns with 0.1% settling for use in both analog and digital audio. The AD8112 operated at 20 kHz has a crosstalk performance of −83 dB and isolation of 90 dB. In addition, ground/power pins surround all inputs and outputs to provide extra shielding for operation in the most demanding audio routing applications. With a differential gain and differential phase better than 0.1% and 0.1°, respectively, and a 0.1 dB flatness output of up to 10 MHz, the AD8112 is suitable for many video applications.
The AD8112 includes eight independent output buffers that can be placed into a disabled state for paralleling crosspoint outputs so that off channel loading is minimized. The AD8112 has a gain of +2. It operates on voltage supplies of ±5 V or ±12 V while consuming only 34 mA or 31 mA of current, respectively. The channel switching is performed via a serial digital control which can accommodate the daisy chaining of several devices or via a parallel control, allowing updating of an individual output without reprogramming the entire array.
The AD8112 is packaged in a 100-lead LQFP and is available over the commercial temperature range of 0°C to 70°C.
**Applications**
- .
- CCTV surveillance/DVR
- .
- Analog/digital audio routers
- .
- Video routers NTSC, PAL, S-Video, SECAM
- .
- Multimedia systems
- .
- Video conferencing
### Features and Benefits
- .
- Low cost, 16 × 8, high speed, nonblocking switch array
Pin-compatible 16 × 16 version available AD8113
- .
- Serial or parallel programming of switch array
- .
- Serial data out allows daisy chaining control of multiple
16 × 8 arrays to create larger switch arrays
- .
- Output disable allows connection of multiple devices without loading the output bus
- .
- Complete solution
Buffered inputs
8 output amplifiers
Operates on ±5 V or ±12 V supplies
Low supply current of 54 mA
- .
- Excellent audio performance VS = ±12 V
±10 V output swing
0.002% THD at 20 kHz maximum 20 V p-p RL = 600 Ω
- .
- Excellent video performance VS = ±5 V
- .
- 0.1 dB gain flatness of 10 MHz
0.1% differential gain error RL = 1 kΩ
0.1° differential phase error RL = 1 kΩ
- .
- Excellent ac performance
−3 dB bandwidth 60 MHz
- .
- Low all-hostile crosstalk of −83 dB at 20 kHz
- .
- Reset pin allows disabling of all outputs connected to a capacitor to ground provides power-on reset capability
- .
- 100-lead LQFP 14 mm × 14 mm