ADS1015-Q1
具有集成 MUX、PGA、比较器、振荡器和参考电压的汽车类 12 位 ADC
The ADS1013-Q1, ADS1014-Q1, and devices ADS101x-Q1 are precision, low-power, 12-bit, I2C-compatible, analog-to-digital converters ADCs offered in a VSSOP-10 package. The ADS101x-Q1 devices incorporate a low-drift voltage reference and an oscillator. The ADS1014-Q1 and ADS1015-Q1 also incorporate a programmable gain amplifier PGA and a digital comparator. These features, along with a wide operating supply range, make the ADS101x-Q1 well suited for power- and space-constrained, sensor measurement applications.
The ADS101x-Q1 perform conversions at data rates up to 3300 samples per second SPS. The PGA offers input ranges from ±256 mV to ±6.144 V, allowing precise large- and small-signal measurements. The ADS1015-Q1 features an input multiplexer MUX that allows two differential or four single-ended input measurements. Use the digital comparator in the ADS1014-Q1 and ADS1015-Q1 for under- and overvoltage detection.
The ADS101x-Q1 operate in either continuous-conversion mode or single-shot mode. The devices are automatically powered down after one conversion in single-shot mode; therefore, power consumption is significantly reduced during idle periods.
- .
- Qualified for Automotive Applications
- .
- AEC-Q100 Qualified With the Following Results:
- .
- Temperature Grade 1: –40°C to +125°C
- .
- HBM ESD Classification 2
- .
- CDM ESD Classification C4B
- .
- 12-Bit Noise-Free Resolution
- .
- Wide Supply Range: 2.0 V to 5.5 V
- .
- Low Current Consumption: 150 µA Continuous-Conversion Mode
- .
- Programmable Data Rate: 128 SPS to 3.3 kSPS
- .
- Single-Cycle Settling
- .
- Internal Low-Drift Voltage Reference
- .
- Internal Oscillator
- .
- I2C Interface: Four Pin-Selectable Addresses
- .
- Four Single-Ended or Two Differential Inputs ADS1015-Q1
- .
- Programmable Comparator ADS1014-Q1 and ADS1015-Q1