TPA0122

具有内部增益设置的 2W 立体声 APA

The is a stereo audio power amplifier in a 24-pin TSSOP thermally enhanced package capable of delivering 2.6 W of continuous RMS power per channel into 3- loads. This device minimizes the number of external components needed, simplifying the design, and freeing up board space for other features. When driving 1 W into 8- speakers, the TPA0122 has less than 0.5% THD+N across its specified frequency range.

Included within this device is integrated depop circuitry that virtually eliminates transients that cause noise in the speakers.

Amplifier gain is internally configured and controlled by two terminals GAIN0 and GAIN1. BTL gain settings of 2, 6, 12, and 24 V/V are provided, while SE gain is always configured as 1 V/V for headphone drive. An internal input MUX allows two sets of stereo inputs to the amplifier. In notebook applications, where internal speakers are driven as BTL and the line outputs often headphone drive are required to be SE, the TPA0122 automatically switches into SE mode when the SE/BTL\ input is activated and reduces the gain to 1 V/V.

The TPA0122 consumes only 18 mA of supply current during normal operation. A miserly shutdown mode reduces the supply current to less than 150 µA.

The PowerPAD package PWP delivers a level of thermal performance that was previously achievable only in TO-220-type packages. Thermal impedances of approximately 35°C/W are truly realized in multilayer PCB applications. This allows the TPA0122 to operate at full power into 8- loads at an ambient temperature of 85°C.

.

Compatible With PC 99 Desktop Line-Out Into 10-k Load

.

Compatible With PC 99 Portable Into 8- Load

.

Internal Gain Control, Which Eliminates External Gain-Setting Resistors

.

2.6-W/Ch Output Power Into 3- Load

.

PC-Beep Input

.

Depop Circuitry

.

Stereo Input MUX

.

Fully Differential Input

.

Low Supply Current and Shutdown Current

.

Surface-Mount Power Packaging 24-Pin TSSO PowerPAD™

PowerPAD is a trademark of Texas Instruments Incorporated.