AD8224HACPZ-R7

精密，双通道， JFET输入，轨到轨仪表放大器 Precision, Dual-Channel, JFET Input, Rail-to-Rail Instrumentation Amplifier

Product Details

The AD8224 is the first single-supply, JFET input instrumentation amplifier available in the space-saving 16-lead, 4 mm × 4 mm LFCSP. It requires the same board area as a typical single instrumentation amplifier yet doubles the channel density and offers a lower cost per channel without compromising performance.

Designed to meet the needs of high performance, portable instrumentation, the AD8224 has a minimum common-mode rejection ratio CMRR of 86 dB at dc and a minimum CMRR of 80 dB at 10 kHz for G = 1. Maximum input bias current is 10 pA and typically remains below 300 pA over the entire industrial temperature range. Despite the JFET inputs, the AD8224 typically has a noise corner of only 10 Hz.

With the proliferation of mixed-signal processing, the number of power supplies required in each system has grown.

Designed to alleviate this problem, the AD8224 can operate on a ±18 V dual supply, as well as on a single +5 V supply. The device’s rail-to-rail output stage maximizes dynamic range on the low voltage supplies common in portable applications. Its ability to run on a single 5 V supply eliminates the need for higher voltage, dual supplies. The AD8224 draws 750 μA of quiescent current per amplifier, making it ideal for battery powered devices.

In addition, the AD8224 can be configured as a single-channel, differential output, instrumentation amplifier. Differential outputs provide high noise immunity, which can be useful when the output signal must travel through a noisy environment, such as with remote sensors. The configuration can also be used to drive differential input ADCs.

For a single-channel version, use the AD8220.

**Applications**

.

Medical instrumentation

.

Precision data acquisition

.

Transducer interfaces

.

Differential drives for high resolution input ADCs

.

Remote sensors

### Features and Benefits

.

Two channels in a small 4 mm × 4 mm LFCSP

.

Custom LFCSP package with hidden paddle

.

Permits routing and vias underneath package

.

Allows full bias current performance

.

Low input currents

.

10 pA maximum input bias current B grade

.

0.6 pA maximum input offset current B grade

.

High CMRR

.

100 dB CMRR minimum, G = 10 B grade

.

90 dB CMRR minimum to 10 kHz, G = 10 B grade

.

Excellent ac specifications and low power

.

1.5 MHz bandwidth G = 1

.

14 nV/√Hz input noise 1 kHz

.

Slew rate: 2 V/µs

.

750 µA quiescent current per amplifier

.

Versatility

See the AD8224 data sheet for details