MC68331CEH20
NXP MC68331CEH20. 芯片, 32位微控制器, 20MHz, 132-PQFP
The is a 32-bit Modular Microcontroller combines high-performance data manipulation capabilities with powerful peripheral subsystems. MCU is built up from standard modules that interface through a common inter-module bus. Standardization facilitates rapid development of devices tailored for specific applications. The MCU incorporates a 32-bit CPU, a system integration module, a general-purpose timer and a queued serial module. The MCU can either synthesize an internal clock signal from an external reference or use an external clock input directly. Operation with a 32.768kHz reference frequency is standard. The maximum system clock speed is 20.97MHz. Because MCU operation is fully static, register and memory contents are not affected by a loss of clock. High-density complementary metal-oxide semiconductor architecture makes the basic power consumption of the MCU low. The CPU32 instruction set includes a low-power stop command that efficiently implements this capability.
- .
- Modular architecture
- .
- Central processing unit CPU32
- .
- Upward object code compatible
- .
- Virtual memory implementation
- .
- Loop mode of instruction execution
- .
- Table lookup and interpolate instruction
- .
- Trace on change of flow
- .
- Hardware breakpoint signal, background mode
- .
- Fully static operation
- .
- External bus support
- .
- Programmable chip-select outputs
- .
- System protection logic
- .
- Watchdog timer, clock monitor and bus monitor
- .
- Test/debug sub module for factory/user test and development
- .
- Queued serial peripheral interface - 80-byte RAM, up to 16 automatic transfers
- .
- Dual function I/O ports
- .
- General-purpose timer
- .
- Three input capture channels
- .
- Four output compare channels
- .
- 2 Pulse-width modulation outputs