TLC4545

16 位 200KSPS ADC，具有串行输出、自动断电和伪差动输入

The TLC4541 and are a family of high performance, 16-bit, low power, miniature CMOS analog-to-digital converters ADCs. These devices operate from a single 5-V supply. Devices are available with single, dual, or single pseudo-differential inputs. All of these devices have a chip select CS\, serial clock SCLK, and serial data output SDO that provides a direct 3-wire interface to the serial port of most popular host microprocessors SPI interface. When interfaced with a DSP, a frame sync signal FS is used to indicate the start of a serial data frame on either pin 1 CS\ or pin 7 FS for the TLC4541. The TLC4545 ADC connects to the DSP via pin 1 only CS\\.

The TLC4541 and TLC4545 are designed to operate with low power consumption. The power saving feature is further enhanced with an auto-power down mode. This product family features a high-speed serial link to modern host processors with an external SCLK up to 15 MHz. Both families use a built-in oscillator as the conversion clock, providing a 2.94 us maximum conversion time.

.

200-KSPS Sampling Rate

.

Built-In Conversion Clock

.

INL: ±2.5 LSB Max,

DNL: 2 to –1 LSB Max

.

SINAD = 84.5 dB, SFDR = 95 dB,

THD = 94 dB at 15 kHz fin, 200 KSPS

.

SPI/DSP-Compatible Serial Interfaces With SCLK Input up to 15 MHz

.

Single 5-V Supply

.

Rail-to-Rail Analog Input With 500 kHz BW

.

Two Input Options Available:

.

TLC4541 – Single Channel Input

.

TLC4545 – Single Channel, Pseudo-differential Input

.

TLC4541 Optimized DSP Interface – Requires FS Input Only

.

Low Power With Auto-Power Down

.

Operating Current: 3.5 mA

.

Auto-Power Down Current: 5 uA

.

Pin Compatible 12/14/16-Bit Family in 8-Pin SOIC and MSOP Packages

.

APPLICA ONS

.

ATE System

.

Industrial Process Control

.

Measurement

.

Motor Control