DAC8408GP

4个8位乘法CMOS D / A转换器，具有记忆 Quad 8-Bit Multiplying CMOS D/A Converter with Memory

Product Details

The DAC8408 is a monolithic quad 8-bit multiplying digital-to-analog CMOS converter. Each DAC has its own reference input, feedback resistor, and onboard data latches that feature read/write capability. The readback function serves as memory for those systems requiring self-diagnostics.

A common 8-bit TTL/CMOS compatible input port is used to load data into any of the four DAC data-latches. Control lines DS1, DS2, and A/B determine which DAC will accept data. Data loading is similar to that of a RAMs write cycle. Data can be read back onto the same data bus with control line R/W. The DAC8408 is bus compatible with most 8-bit microprocessors, including the 6800, 8080, 8085, and Z80. The DAC8408 operates on a single +5 volt supply and dissipates less than 20 mW. The DAC8408 is manufactured using PMI"s highly stable, thin-film resistors on an advanced oxide-isolated, silicon-gate, CMOS process. PMI"s improved latch-up resistant design eliminates the need for external protective Schottky diodes.

### Features and Benefits

.

Four DACs in a 28 Pin, 0.6 Inch Wide DIP or 28-Pin JEDEC Plastic Chip Carrier

.

±1/4 LSB Endpoint Linearity

.

Guaranteed Monotonic

.

DACs Matched to Within 1%

.

Microprocessor Compatible

.

Read/Write Capability with Memory

.

TTL/CMOS Compatible

.

Four-Quadrant Multiplication

.

Single-Supply Operation +5 V

.

Low Power Consumption

.

Latch-Up Resistant

.

Available in Die Form