ADA4096-2WARMZ-R7
30 V ,微功耗,过压保护 30 V, Micropower, Overvoltage Protection
Product Details
The ADA4096-2 dual and ADA4096-4 quad operational amplifiers feature micropower operation and rail-to-rail input and output ranges. The extremely low power requirements and guaranteed operation from 3 V to 30 V make these amplifiers perfectly suited to monitor battery usage and to control battery charging. Their dynamic performance, including 27 nV/√Hz voltage noise density, recommends them for battery-powered audio applications. Capacitive loads to 200 pF are handled without oscillation.
The ADA4096-2 and ADA4096-4 have overvoltage protection inputs and diodes that allow the voltage input to extend 32 V above and below the supply rails, making this device ideal for robust industrial applications. The ADA4096-2 and ADA4096-4 feature a unique input stage that allows the input voltage to exceed either supply safely without any phase reversal or latch-up; this is called overvoltage protection, or OVP.
The dual ADA4096-2 is available in 8-lead LFCSP 2 mm × 2 mm and 8-lead MSOP packages. The ADA4096-2 is available in 16-lead LFCSP 3 mm × 3 mm and 14-lead TSSOP packages. The ADA4096-2W is qualified for automotive applications and is available in an 8-lead MSOP package.
The ADA4096-2 family is specified over the extended industrial temperature range of −40°C to +125°C and is part of the growing selection of 30 V, low power op amps from Analog Devices, Inc.
**Applications**
- .
- Battery monitoring
- .
- Sensor conditioners
- .
- Portable power supply controls
- .
- Portable instrumentation
### Features and Benefits
- .
- Input overvoltage protection, 32 V above and below the supply rails
- .
- No phase reversal for input voltage up to ±32 V beyond the power supply
- .
- Rail-to-rail input and output swing
- .
- Low power: 60 μA per amplifier typical
- .
- Unity-gain bandwidth
- .
- 800 kHz typical at VSY = ±15 V
- .
- 550 kHz typical at VSY = ±5 V
- .
- 465 kHz typical at VSY = ±1.5 V
- .
- Single-supply operation: 3 V to 30 V
- .
- Low offset voltage: 300 μV maximum
- .
- Large signal voltage gain: 120 dB typical
- .
- Unity gain stable
- .
- Qualified for automotive applications