PTH05030W

30A 输出 5V 输入的宽输出调节插拔电源模块

The PTH05030 is a high-current non-isolated power modules from Texas Instruments. This product is characterized by high efficiencies, and up to 30 A of output current, while occupying a mere 1.64 in² of PCB area. In terms of cost, size, and performance, the series provides OEM’s with a flexible module that meets the requirements of the most complex and demanding mixed-signal applications. These include the most densly populated, multi-processor systems that incorporate high-speed DSP’s, microprocessors, and ASICs.

The series uses double-sided surface mount construction and provides high-performance step-down power conversion from a 5-V input bus voltage. The output voltage of the can be set to any value over the range 0.8 V to 3.6 V, using a single resistor.

This series includes Auto-Track™. Auto-Track simplifies power-up and power-down supply voltage sequencing in a system by enabling modules to track each other, or any other external voltage.

Each model also includes an on/off inhibit, output voltage adjust trim, and margin up/down controls. An output voltage sense ensures tight load regulation, and an output over-current and thermal shutdown feature provide for protection against external load faults.

Package options inlude both through-hole and surface mount connfigurations.

.

Up to 30 A Output Current

.

5-V Input Voltage

.

Wide-Output Voltage Adjust 0.8 V to 3.6 V

.

180 W/in³ Power Density

.

On/Off Inhibit

.

Efficiencies up to 94%

.

Pre-Bias Startup

.

Margin Up/Down Controls

.

Under-Voltage Lockout

.

Auto-Track™ Sequencing

.

Output Over-Current Protection Non-Latching, Auto-Reset

.

Over-Temperature Protection

.

Operating Temp: –40 to +85°C

.

Safety Agency Approvals:

   UL 1950, CSA 22.2 950, EN60950 VDE Pending

.

Point-of-Load Alliance POLA Compatible