IFX9201SG

H-Br with SPI 36V 6A DSO12 SMD

Description:

The a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is availabe from now. The outputs can be pulse width modulated at frequencies up to 20kHz - that enables operation above the human sonic range - by means of PWM/DIR control. While the signal at the direction input defines the direction of the DC motor, the PWM signal controls the duty cycle. For load currents above the current limitation threshold 7A typ. the H-Bridge switches into chopper current limitation mode. The TLE9201SG is protected against short circuits and over temperature and provides diagnosis via SPI or basic error feedback via status flag. Open load can be detected when the bridge is disabled or during PWM operation of inductive loads. The robust PG-DSO-12-17 package provides excellent thermal performance due to the thick copper heat slug. Thanks to the protruding edges of the heat slug the package is well suited for automatic optical solder inspection.

 

** H-BRIDGE KIT 2GO with the H-Bridge IFX9201 **

** **

 

Summary of Features:

.

RDSon typ. < 100mΩ per switch

.

Operation Voltage 4.5V to 36 V

.

Logic inputs: 3.3-V and 5-V TTL/ 5-V CMOS compatible

.

Low standby current

.

Short circuit and over-temperature protection

.

VS under-voltage protection

.

Open load detection in ON and OFF state

.

Detailed SPI diagnosis or simple error flag

.

Green product RoHS compliant

Benefits:

.

Small package saves board space

.

Includes over current and over temperature protection

.

Simple design with few external components

.

SPI enables for easy Diagnosis