TLC2254AQDREP

高级LinCMOSâ ?? ¢轨到轨极低功耗运算放大器 Advanced LinCMOS™ RAIL-TO-RAIL VERY LOW-POWER OPERATIONAL AMPLIFIERS

description

The TLC2252 and TLC2254 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC225x family consumes only 35 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. The noise performance has been

dramatically improved over previous generations of CMOS amplifiers. Looking at Figure 1, the TLC225x has a noise level of 19 nV/√Hzat 1kHz; four times lower than competitive micropower solutions.

Controlled Baseline

− One Assembly/Test Site, One Fabrication Site

Extended Temperature Performance of −40°C to 125°C

Enhanced Diminishing Manufacturing Sources DMS Support

Enhanced Product-Change Notification

Qualification Pedigree†

ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 150 V TLC2252/52A and 100 V TLC2254/54A Using Machine Model C = 200 pF, R = 0

Output Swing Includes Both Supply Rails

Low Noise. . . 19 nV/√HzTyp at f = 1 kHz

Low Input Bias Current...1 pA Typ

Fully Specified for Both Single-Supply and Split-Supply Operation

Very Low Power...35 µA Per Channel Typ

Common-Mode Input Voltage Range Includes Negative Rail

Low Input Offset Voltage 850 µV Max at TA= 25°C TLC225xA

Macromodel Included

Performance Upgrades for the TS27L2/L4 and TLC27L2/L4