CAT5132ZI-50-G

Digital Potentiometer 128POS 50KΩ Single 10Pin MSOP Rail

The CAT5132 is a high voltage digital POT with non-volatile wiper setting memory, operating like a mechanical potentiometer. The tap points between the 127 equal resistive elements are connected to the wiper output via CMOS switches. The switches are controlled by a 7-bit Wiper Control Register WCR. The wiper setting can be stored in a 7-bit non-volatile Data Register DR. The WCR is accessed via the I²C serial bus.Upon power-up, the WCR is set to mid-scale 1000000. After the power supply is stable, the contents of the DR are transferred to the WCR and the wiper is returned to the memorized setting.The CAT5132 has two voltage supplies: V, the digital supply and V+, the analog supply. V+ can be much higher than V, allowing for 16V analog operations. The CAT5132 can be used as a potentiometer or as a two-terminal variable resistor.

Features

---

 |

.

Single linear digital POT with 128 taps

.

End-to-end resistance of 10 kΩ, 50 kΩ & 100 kΩ

.

I²C interface

.

Fast Up/Down wiper control mode

.

Automatic wiper setting recall at power up

.

Non-volatile wiper setting storage

.

Digital Supply range VCC: 2.7 V to 5.5 V

.

Analog Supply range V+: +8.0 V to +16 V

.

Low Standby Current: 15 µA

.

100 Year wiper setting memory

.

Industrial Temperature range: -40°C to +85°C