FRA2X2BL

Cable Accessories Fitting Acrylonitrile Butadiene Styrene Black

* Large capacity 2"x 2" and 4" x 4" sizes * Minimum 2" bend radius control fittings * Snap-on covers * Mates to cable management rack panels

贸泽:
Wire Ducting Fitting and Cover HORZ 90o Angle,

艾睿:
Cable Accessories Fitting Acrylonitrile Butadiene Styrene Black

Allied Electronics:
Fitting and Cover, Horizontal 90o Angle,

安富利:
The 2x2 and 4x4 routing systems shall be used to route, segregate, and protect fiber optic and communication cabling. The solid wall routing systems should be UL Listed as an optical fiber channel for general purpose use. They shall be compliant with UL 2024A and NEC articles 770 and 800 when installed per instructions. The slotted wall channel and cover shall be UL Recognized. A full complement of fittings with a 2" minimum bend radius, snap-on covers, and mounting brackets shall be available. Channel and fittings shall be manufactured from impact-resistant and flame retardant V-0 materials. Channel shall have non-slip snap-on covers that can be easily removed to allow access for moves, adds, and changes. Channel and fittings finish shall be pure color, resist scratches, dents, and not peel or corrode. Available system colors shall be yellow, orange, black, and light gray. A full complement of brackets shall be available for attaching system components to ladder rack, threaded rod, auxiliary framing, equipment racks, and raise floor pedestals.

Chip1Stop:
Cable Accessories Fitting Acrylonitrile Butadiene Styrene Black

Verical:
Cable Accessories Fitting Acrylonitrile Butadiene Styrene Black

MASTER:
2 x 2 Fiber-Duct Fitting. Attaches to channel to create a 90Â horizontal turn from a straight horizontal run. Cover included. Black.

Online Components:
Attaches to channel to create a 90° horizontal turn from a straight horizontal run. Cover included.

AMEYA360:
FITTING SYS RA ABS BLK 2X2"