INA210-214EVM

TEXAS INSTRUMENTS INA210-214EVM Evaluation Module, Bi-Directional, Low/High Side, Voltage Out Current Shunt Monitor

The is an evaluation module designed to evaluate the performance of the INA210-214 devices. The INA210-214 devices are voltage output, high side measurement, bidirectional, zero drift current shunt monitors. This family of devices has gains that range from 50V/V to 1000V/V. The voltage developed across the device inputs is amplified by the corresponding gain of the specific device and is presented at the output pin. These devices can sense voltage drops across shunts at common mode voltages from -0.3V to 26V, independent of supply voltages. These devices operate with supply voltages between 2.7V and 26V and draw a maximum of 100mA. The low offset of the zero drift architecture enables current sensing with maximum drops across the shunt as low as 10mV full scale.

.

Easy handling of the small SC70 package

.

Easy access to all device pins

.

Space for optional input filtering capacitors and resistors as well as a prototype area

.

Space for shunt resistors of various footprints

.

Evaluation of all gain options through provided device boards

.

Location to solder a test device directly onto the board

.

Multiple input signal options

This EVM should be operated within the input voltage range of -0.3V to 26V and the output voltage range of -0.3V to 26V.Exceeding the specified input voltage range may cause damage to the EVM.