TPS28226
8 引脚高频 4A 吸入电流同步 MOSFET 驱动器
The is a high-speed driver for N-channel complimentary driven power MOSFETs with adaptive dead-time control. This driver is optimized for use in variety of high-current one and multi-phase DC-to-DC converters. The is a solution that provides high efficiency, small size and low EMI emissions.
The efficiency is achieved by up to 8.8-V gate drive voltage, 14-ns adaptive dead-time control, 14-ns propagation delays and high-current 2-A source and 4-A sink drive capability. The 0.4-Ω impedance for the lower gate driver holds the gate of power MOSFET below its threshold and ensures no shoot-through current at high dV/dt phase node transitions. The bootstrap capacitor charged by an internal diode allows use of N-channel MOSFETs in a half-bridge configuration.
- .
- Drives Two N-Channel MOSFETs with 14-ns Adaptive Dead Time
- .
- Wide Gate Drive Voltage: 4.5 V Up to 8.8 V With Best Efficiency at 7 V to 8 V
- .
- Wide Power System Train Input Voltage: 3 V Up to 27 V
- .
- Wide Input PWM Signals: 2.0 V up to 13.2-V Amplitude
- .
- Capable to Drive MOSFETs with ≥40-A Current per Phase
- .
- High Frequency Operation: 14-ns Propagation Delay and 10-ns Rise/Fall Time Allow FSW – 2 MHz
- .
- Capable to Propagate <30-ns Input PWM Pulses
- .
- Low-Side Driver Sink On-Resistance 0.4 Ω Prevents dV/dT Related Shoot-Through Current
- .
- 3-State PWM Input for Power Stage Shutdown
- .
- Space Saving Enable Input and Power Good Output Signals on Same Pin
- .
- Thermal Shutdown
- .
- UVLO Protection
- .
- Internal Bootstrap Diode
- .
- Economical SOIC-8 and Thermally Enhanced 3-mm x 3-mm DFN-8 Packages
- .
- High Performance Replacement for Popular 3-State Input Drivers