ADV7682WBSWZ-RL

APIX2 Transmitter Serial Interface Automotive 100Pin LQFP EP T/R

Product Details

The ADV7682 is a high quality, dual input HDMI® and single input ITU-R BT.656 receiver with an APIX®2 transmitter, compatible with APIX® and APIX2 receiver technology from Inova Semiconductors. It incorporates dual port HDMI receivers that support all mandatory 3D TV formats defined in HDMI. The ITU-R BT.656 8-bit receiver supports resolutions up to 720p when using a 148.5 MHz input clock. A standard ITU-R BT.656 input clock of 27 MHz is also supported. When using the ITU-R BT.656 interface, only embedded timing is supported. There is no provision for using separate horizontal sync Hsync or vertical sync Vsync inputs. The ADV7682 also supports DVI or HDMI resolutions up to a 107 MHz pixel clock at 24 BPP or a 140 MHz pixel clock at 18 BPP. However, the input format configuration across both video ports must be managed to ensure that the maximum total video payload for the APIX2 interface is not exceeded.

ADV7682 integrates a CEC controller that supports the capability discovery and control CDC feature.

The ADV7682 has an audio output port for the audio data extracted from any one of the HDMI input streams. The HDMI receiver also has an advanced mute controller that prevents audible extraneous noise pops and clicks in the audio output. Additionally, the ADV7682 can be set to output TDM serial audio, which allows transmission of four multiplexed stereo serial audio channels on a single audio output interface port.

The following HDMI source audio formats are accessible as outputs from the ADV7682:

.

A stream from the audio serializer two audio channels.

.

A TDM stream from the audio serializer eight audio channels, time multiplexed. The maximum audio bit rate is 48 kHz.

.

A stream from the audio serializer two uncompressed channels or N compressed channels, for example, AC3.

.

An external master clock MCLK used to output audio data in stereo modes. The maximum audio bit rate is 48 kHz for sample rate converter SRC mode with an external MCLK.

The following audio formats are supported as inputs to the ADV7682, for transmission over the APIX2 interface:

.

One serial audio stream two audio channels.

.

One TDM serial audio stream eight audio channels, time multiplexed. The maximum audio bit rate is 96 kHz.

.

Two serial audio streams using a combination of the serial audio input ports I2S1 and I2S0 or HDMI extracted audio two independent stereo audio channels with asynchronous master clocks. On-board SRC is performed in this configuration. The maximum audio bit rate is 48 kHz in SRC modes.

One of the HDMI input ports is assigned a dedicated 5 V detect and Hot Plug™ assert pins. The HDMI receiver also includes an integrated equalizer that ensures the robust operation of the interface with long cables, including support for Type E automotive cable assemblies and connectors.

The ADV7682 contains one main component processor CP that processes the video signals from any one of the HDMI receiver ports. The ADV7682 provides features such as contrast, brightness, and saturation adjustments; a standard identification STDI detection block; and free run and synchronization alignment controls.

Fabricated in an advanced CMOS process, the ADV7682 is provided in a 14 mm × 14 mm, 100-lead surface-mount LQFP_EP RoHS-compliant package and is specified over the −40°C to +85°C temperature range.

ADV7682 is offered in automotive, industrial version.

**Applications**

.

Automotive infotainment

.

Infotainment head units

.

Rear seat entertainment systems

.

Automotive media port applications

.

HDMI repeaters and video switches

### Features and Benefits

.

APIX2 transmitter with HDCP

High-bandwidth Digital Content Protection HDCP 1.4 support with internal preprogrammed HDCP keys

Dual-channel encryption engine supports simple daisy-chain implementation for remote displays

.

Independent encryption of video and audio

.

Supports for two independent video streams and two synchronous audio streams

.

Up to 3000 Mbps sustained downstream link bandwidth

.

Up to 187.5 Mbps upstream link bandwidth

.

ITU-R BT.656 Support

8-bit ITU-R BT.656 Interface with embedded timing

720p Supported at 148.5 MHz Clock rate

.

Audio support

.

HDMI audio extraction support

Supports multiplexed TDM I2S audio I/O

.

General

Dual interrupt controller with APIX link status reporting

Internal EDID RAM

.

Qualified for automotive applications

.

See data sheet for additional features