M5735207

Mettec 箱，A 型箱子由铝制前框、顶盖和底盖、压延边以及后面板构成 前框凹陷，用于装入可选的铝制前面板 底板带有接地螺栓 侧面压延槽上带有导向脊，用于印刷电路板安装，可选的导板或印刷电路板夹附件可提供更多安装点 所有部分完全成一体，强度高、屏蔽效果好 提供完全装配 ### Mettec 箱，A 型### Mettec 箱箱结构 --- 1 个前框 2 个侧面压延槽 顶盖和底盖 后面板压延槽 4 个防滑支脚和固定螺钉 倾斜和旋转手柄，请参见唯一库存号：209-5634、209-5498、209-5757 和 209-5836 ### 注煤灰色 = RAL7016，灰白色 = RAL9002### 金属仪器箱

The is a metallic Enclosure with rear bezel and rear panel. The METTEC desk case design is assembled by eight M4 screws. The side extrusions are located by a recess in the rear of the bezel and fixed with screws. The base and top panels are captured by horizontal slots in the case. It is comfortable for electronics equipment with large front panel LCD modules, LEDs, push buttons and membrane keyboards.

.

Base panels are pre-punched for the case feet

.

M4 earth stud is fitted to the base panels