MBC-SAM9G35

EMBEST  MBC-SAM9G35  开发板, SAM9G35 ARM内核

The is an ARM embedded core board which integrate the ATMEL ARM926EJ-S-based processor AT91SAM9G35, operating at 400MHz frequency and can support WinCE and Linux. Based on the ARM926EJ-S processor and running at 400MHz, the SAM9G35 integrates advanced user interface and high speed communication peripherals. It features an advanced graphics LCD controller with 4 layer overlay offering picture in picture, alpha blending, scaling, rotation and colour conversion and a 10bit ADC that supports 4 or 5 wire resistive touch screen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, USB host and device and FS USB host with on chip transceivers, 10/100 Ethernet MAC, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S and TWIs.

.

ARM926EJ-S ARM Thumb processor running at up to 400MHz at 1.0V +/- 10%

.

16KB data cache, 16KB instruction cache, memory management unit

.

64KB internal ROM embedding bootstrap routine: boot on nandflash, SDCard, data flash

.

Programmable order

.

32KB internal SRAM, single cycle access at system speed

.

Boot mode select option, remap command

.

Selectable 32768Hz low power oscillator and 12MHz oscillator

.

Shut down controller with four 32bit battery backup registers

.

3 channel 32bit timer/counters

.

Four 32bit parallel input/output controllers