BQ24103ARHLT
Texas Instruments### 电池管理,Texas Instruments
多化学电池充电控制器,Texas Instruments
### 电池管理,Texas Instruments
得捷:
IC BATT CHG LI-ION 1-2CEL 20VQFN
立创商城:
BQ24103ARHLT
德州仪器TI:
Standalone 1-2 cell 2A synchronous Buck battery charger with integrated FET
欧时:
Texas Instruments BQ24103ARHLT 锂离子、锂聚合物、镍镉、镍氢 电池充电控制器, 2A最大输出
艾睿:
This switch mode charger BQ24103ARHLT charge controller from Texas Instruments will keep your battery safe by monitoring the state of the battery, calculating data, and optimizing the performance. Its output produces a current of 150 to 2000 mA. With an output that has a voltage of 4.2|8.4 V, this is power management at its best. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. This device has a minimum operating supply voltage of 4.35 V and a maximum of 16 V. This battery gauge has an operating temperature range of -40 °C to 85 °C. This device runs on Li-Ion|Li-Pol|NiMH|NiCD Packs.
安富利:
Switch Mode Charger Li-Ion/Li-Pol/NiMH/NiCD Packs 150mA to 2000mA 4.2V/8.4V 20-Pin VQFN EP T/R
Chip1Stop:
Battery Charge Management Standalone Synchronous Switch-mode Li-Ion Charger with 2A FET Switch Mode Charger Li-Ion/Li-Pol/NiMH/NiCD Packs 150mA to 2000mA 4.2V/8.4V 20-Pin VQFN EP T/R
Verical:
Switch Mode Charger Li-Ion/Li-Pol/NiMH/NiCD Packs 150mA to 2000mA 4.2V/8.4V 20-Pin VQFN EP T/R
Newark:
Battery Charger for 2 Cells of Li-Ion battery, 16V input, 2 A charge, QFN-20