SPOT-ON PEELABLE SOLDER.RESIST

MULTICORE / LOCTITE SPOT-ON PEELABLE SOLDER.RESIST Coating, Solder Mask, Chemical, Bottle, 250g

Designed to be used in conjunction with non-corrosive "Ersin" rosin or "Xersin" multicore synthetic resin fluxes which do not require removal by washing after soldering

.

Material dries to a thinner coating

.

Can be used undiluted but, can be thinned with up to 50% of water for spraying and brushing

.

Material dries in 40 mins at 80°C 176°F or 2 hours at ambient temperature

.

Supplied in a 250ml bottle

The maximum operating temperature for Spot-On is 275°C for 1 minute. Any hotter or longer may cause problems with removal after soldering.