DAC8531E/250G4

TEXAS INSTRUMENTS  DAC8531E/250G4  数模转换器, 16 bit, 93 kSPS, 串行, 2.7V 至 5.5V, VSSOP, 8 引脚

The is a low-power single 16-bit buffered voltage output Digital-to-analog Converter DAC with on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC8531 uses a versatile three-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, MICROWIRE™ and digital signal processor DSP interfaces. The DAC8531 requires an external reference voltage to set the output range of the DAC. The DAC8531 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place to the device. The DAC8531 contains a power-down feature, accessed over the serial interface that reduces the current consumption of the device to 200nA at 5V. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 2mW at 5V reducing to 1µW in power-down mo

.

Power-on reset to zero

.

Ensured monotonic by design

.

Settling time - 10µs to ±0.003FSR

.

Low-power serial interface with Schmitt-triggered inputs

.

On-chip output buffer amplifier, rail-to-rail operation

.

SYNC\interrupt facility

.

Green product and no Sb/Br