1121-0625-P5

PACE  1121-0625-P5  烙铁头, SOT-23, 0.76 mm

The is a 0.03-inch ID x 0.08-inch OD Endura Thermo-Drive Desoldering Tip for use in the SX-70 and SX-80 heaters. The inside diameter ID of the tip must be large enough to fit over the lead, while providing sufficient room so that air and solder can be drawn through the tip. The outside diameter OD of the tip must be slightly smaller than the diameter of the pad to prevent tip contact to the board laminate and minimize the possibility of damage.