MC9S08QE8CWL
MCU 8Bit S08 CISC 8KB Flash 2.5V/3.3V 28Pin SOIC W Tube
Overview
The S08QE family, comprised of a pin-compatible 8-bit and 32-bit device duo, is Our first family in the Flexis series. The Flexis series of controllers is the connection point of the ® Controller Continuum where 8- and 32-bit compatibility become reality.
The S08QE128 pushes the boundaries of the 8-bit architecture performance with 128 KB of flash, 24 analog-to-digital converter ADC channels and delivering up 25 MHz in bus frequency. The 32-bit MCF51QE128 is pin-, peripheral- and tool-compatible with the 8-bit S08QE128 device. They share a common set of peripherals and development tools, delivering the ultimate in migration flexibility.
MoreLess
## Features
### Power-Saving Features
* Two ultra-low-power stop modes, one of which allows limited use of peripherals
* New low-power run and wait modes
* 6 µs typical wake up time from stop mode
* Internal clock Source ICS—module containing a frequency locked-loop FLL controlled by internal or external reference
* Oscillator OSC—loop-control Pierce oscillator
* crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
* Clock gating disables clocks to unused peripherals
### 8-bit HCS08 Central Processing Unit CPU
* Up to 20 MHZ HCS08 CPU from 1.8V to 3.6V and across temperature range of -40°C to +85°C
* HCS08 instruction set with added BGND instruction
* Support for up to 32 interrupt/reset sources
### On-Chip Memory
* Up to 128 KB flash read/program/erase over full operating voltage and temperature
* Up to 8 KB random-access memory RAM
### Peripherals
* Two analog comparator ACMP
* Option to compare to an internal reference
* Output can be optionally routed to TPM as input capture trigger
* Analog Digital Converter ADC
* Up to 24-channel
* 12-bit resolution
* 2.5 µs conversion time
* Automatic compare function
* 1.7 mV/°C temperature sensor
* Internal bandgap reference channel
* Operation in low-power stop3
* 2x Serial communications interface SCI
* Two modules 0ffering asynchronous communications
* 13-bit break option
* Flexible baud rate generator
* Double buffered transmit and receive
* Optional H/W parity checking and generation
* Up to 2x Serial Peripheral Interfaces SPI
* Two modules with full-duplex or single-wire bidirectional
* double-buffered transmit and receive
* master or slave mode
* MSB-first or LSB-first shifting
* Timer/pulse-width modulator TPM
* One 6-channel TMP3
* Two 3-channel TPM1 and TPM2
* Selectable input capture
* Output compare
* Or buffered edge- or center-aligned PWM on each channel
* Two I2C
* Up to 100 kbps with maximum bus loading
* Multi-master operation
* Programmable slave address
* Interrupt-driven byte-by-byte data transfer
* Supports broadcast mode and 10-bit addressing
### Input/Output
* Up to 70 GPIO General Purpose Input/Output, one input-only and one output-only pin
* 16 Keyboard Interrupts KBI pins with selectable polarity
### System Protection
* Watchdog computer operating properly COP reset with option to run from dedicated 1 kHz internal clock source or bus clock
* Low-voltage detection with reset or interrupt, selectable trip points
* Illegal op code detection with reset
* Flash block protection
### Development Support
* Single-wire background debug interface
* Breakpoint capability
* ICE debug module —debug module supports both tag and force breakpoints
* Three comparators
* Nine trigger modes
* Eight deep FIFO for storing change-of-flow addresses and event-only data
* Supports both tag and force breakpointsComparison Table
### MC9S08QE Family Members
| ADC Channels
S08QE32| | | | | | | | |
S08QE8| | | | | | | | |
S08QE64| | | | | | | | |
MCF51QE| | | | | | | | |
S08QE4| | | | | | | | |
S08QE96| | | | | | | | |
S08QE128| | | | | | | | |
S08QE16| | | | | | | | |
