TPS54240-Q1

具有 Eco-Modetm 的汽车类 3.5V 至 42V 输入、2.5A、2.5MHz 降压 SWIFTtm 转换器

The device is a 42-V, 2.5-A, step-down regulator with an integrated high-side MOSFET. Current-mode control provides simple external compensation and flexible component selection. A low-ripple pulse-skip mode reduces the no-load, regulated-output supply current to 138 µA. Using the enable pin, shutdown supply current is reduced to 1.3 µA when the enable pin is low.

Undervoltage lockout is internally set at 2.5 V, but can be increased using the enable pin. The output voltage start-up ramp is controlled by the slow-start pin that can also be configured for sequencing/tracking. An open-drain power-good signal indicates the output is within 94% to 107% of its nominal voltage.

A wide switching-frequency range allows efficiency and external component size to be optimized. Frequency foldback and thermal shutdown protects the part during an overload condition.

The TPS54240-Q1 is available in a 10-pin thermally enhanced MSOP PowerPAD package.

.

Qualified for Automotive Applications

.

AEC Q100 Qualified With the Following Results:

.

Device Temperature Grade 1:

–40°C to 125°C Ambient Operating

Temperature Range

.

Device HBM ESD Classification Level H2

.

Device CDM ESD Classification Level C6

.

3.5-V to 42-V Input Voltage Range

.

200-mΩ High-Side MOSFET

.

High Efficiency at Light Loads With a

Pulse-Skipping Eco-mode Control Scheme

.

138-µA Operating Quiescent Current

.

1.3-µA Shutdown Current

.

100-kHz to 2.5-MHz Switching Frequency

.

Synchronizes to External Clock

.

Adjustable Slow Start/Sequencing

.

UV and OV Power-Good Output

.

Adjustable UVLO Voltage and Hysteresis

.

0.8-V Internal Voltage Reference

.

MSOP10 PowerPAD Package

.

Supported by SwitcherPro Software Tool

http://focus.ti.com/docs/toolsw/folders/print/switcherpro.html

.

For SWIFT Documentation, See the Web site at http://www.ti.com/swift